coal slurry dewatering - Xinxiang Gaofu Machinery Co., Ltd
×

Coal Slurry Dewatering Solution

Solution introduction

1, flotation tailings of coking coal preparation plant
2, slime is produced by coal-water mixture
3, the slime from mine drainage and gangue mountain watering washed down

Related Products

Dewatering needs

  • Material: Slime
  • Capacity: According to customer requirement
  • Mesh size: 200 mesh
  • Density: 30%-90%

Information

1, flotation tailings of coking coal preparation plant
2, slime is produced by coal-water mixture
3, the slime from mine drainage and gangue mountain watering washed down

Characteristics of slime

1, fine grain size, more particle content, especially less than 200 mesh particles accounted for about 70% to 90%.
2, strong water holding capacity, high moisture content. The slime water content is generally more than 30% after sludge filtered by the disc vacuum filter. Folding belt filter dehydrated slime water content in 26% to 29%; the filter press dehydrated slime water content in 20% to 24%.
3, Ash content is high, low calorific value. The slime can be divided into three categories according to the ash and calorific value: low ash coal ash is 20% to 32%, calorific value of 12.5 ~ 20MJ / kg; middle ash coal ash is 30% to 55% , calorific value of 8.4 ~ 12.5MJ / kg; high ash coal ash is > 55%, calorific value of 3.5 ~ 6.3MJ / kg.
4, More sticky. As the slime generally contains more clay minerals, coupled with high moisture content, particle size composition is fine, so most of the slime viscosity, and some also have a certain mobility. Due to these characteristics, it is difficult to pile, store and transport slime. Especially in the stockpile, its shape is very unstable, water is lost, dry that is flying. The result is not only a waste of valuable coal resources, but also caused serious environmental pollution, and sometimes even constrained the normal production of coal preparation plant, a coal preparation plant a more difficult problem.

Comparison of New Coal Slime Dehydration Process with Conventional Coal Slurry Precipitation

Related Products

    Dewatering Screen

    Dewatering screen adopt dual-electrode self-synchronization technology, universal eccentric block, adjustable amplitude vibrator. The machine is combined mainly by the screen box, exciter, support system and motor. The two mutually independent vibrators are respectively driven by the tape coupling to do synchronous reverse operation. The centrifugal force generated by two eccentric masses is superposed along the vibration direction and reversely counteracted, thereby forming a single vibration force along the vibration direction, making the screen box reciprocating linear motion.

    Dewatering screen, also known as high-frequency dewatering screen, changing the water surface tension of pulp through the exciting force, pulp water through the screen to become the undersize material, and fine material is blocked by the screen to form the filter layer by the vibration of the forward movement of discharge. Dewatering screen is mainly used for detailings dewatering in the mineral processing industry, coal slurry dehydration of coal preparation plant, washed quartz sand dewatering and ceramic slurry dehydration, and wet and dry classification, dehydration, removal and mud removal of medium and fine granular materials in industrial sectors such as electric power, sugar making and salt making.

    Learn More