The production process of molybdenum powder is a complex physical and chemical process. Most industrial methods use ammonium molybdate, followed by thermal
decomposition and hydrogen reduction.

An important metal powder in the powder metallurgy industry. Iron powder is used in large quantities in powder metallurgy production, accounting for about 85% of the total
consumption of metal powder

The entire screening system adopts a negative pressure cycle design and is equipped with dust collectors and
other equipment

Copper powder obtained by reduction reaction of copper oxide. Fine reduced copper powder with an average particle size of about 10 μm is difficult to prepare high-performance products through the injection molding process due to its irregular powder shape and high residual oxygen content.

Metallic silicon, also known as crystalline silicon or industrial silicon, is mainly used as an additive for non-iron-based alloys. Silicon is a non-metallic element, gray in color, metallic in color, hard and brittle.

In addition to certain requirements on the impurity content of tungsten powder, the oxygen content must be controlled within a certain range.

Zinc powder is a dark gray powdered metallic zinc that can be used as a pigment and has extremely strong hiding power. It has good anti-rust and atmospheric corrosion resistance.

Steel shot is a kind of spherical particles which made by special material through a special heat treatment. Steel shot is a common surface treatment material, there is a wide range of steel shots, the raw materials and equipment required are also different for different types of shots. The main features of steel shot are following :

Steel shot is a kind of high quality wear-resistant material, hardness of steel shot is moderate, strong toughness, good impact resistance and long service life. It has a good rebound, clean up fast, low consumption When cleaning the workpiece . Steel shot are used in a wide range of applications, such as castings, forgings, machined parts and heat-treated parts. General manufacturing, shipbuilding, etc. Also need to use steel shot.

First, melt high-quality steel , wool, steel scrap, and then thrown the molten steel into the water which forming by centrifugal plate with high-speed centrifuge, the sharp drop in the surface temperature of the steel shots, which is a quenching. The quenched pellets are dried and reheated to a suitable hardness in the furnace and the temper treated steel pellets are sorted by mechanical screen into different grades according to SAE standard for shot peening equipment.

Alloy powder is a metal powder formed by the partial or complete alloying of two or more components. Alloy powder is mainly composed of iron alloy powder, copper alloy powder, nickel alloy powder, cobalt alloy powder, aluminum alloy powder, titanium alloy powder and precious metal alloy powder. It also can be used to improve the wear resistance of the workpiece surface or to repair the size of wear parts and composite anti-friction materials for automotive applications, with the powder superalloy technology used in aerospace manufacturing, milling, there is a higher request about powder processing technology.